Neutral Sans Workhorse
Atherna + Bargain Condensed
Lets Atherna own the focal silhouette while handling secondary copy, sizing and subheads cleanly.
Inspect Bargain Condensed specimenDisclosure: MakerFileHub may earn a commission from qualifying purchases via paid links on this page. How our links work.
Tribal-horned extreme metal face with dripping points and a horned crest
Atherna
Atherna is an extreme-metal face in which the letters grow horns and thorns, the joins drip downward and a crest sits above the word, so the mark reads as a tribal sigil rather than as type.
Paid link
Get this fontProject & layout blueprintsAt-a-glance maker compatibility
Cutting, print & workflow scorecard.
Fine grain and micro-texture excel in 300 DPI print, sublimation, and screen print rather than small vinyl weeding.
Plotter & output verdictPrint, DTF & Sublimation First
Recommended minimum scalePrint any scale · Vinyl 2.2 in+
Character set & structureMulti-Style (Italic, Bold)
OpenType & PUA accessStylistic Alternates
Best surfaces & mediaBrand Packaging · Social Graphics · Vinyl Decals
Compatible design toolsIllustrator · Affinity · Canva Pro · Cricut & Silhouette
Visual anatomy & craft review
Letterform structure
of Atherna.
The A rises into two horned peaks, the T loses its bar to a crest, the h dissolves into a fan of thorns and the rest of the word interlocks through shared stems, all at a heavy weight with every edge cut to a point and drips below the baseline. The tribal geometry is the character: the horns curve rather than spike, which is what separates the face from a purely jagged black-metal style while keeping the same mass at 80 pt. Legibility is limited to recognition at large sizes, and the drips belong to the drawing rather than to a treatment. The dark ground, the gold ink, the skull behind, the small badges are presentation; the display face is the word shown and its caption.
Tribal · Horned · Extreme
Two-font hierarchy recipes
Suggested font
pairings.
Tested contrast partners — pairing Atherna with grounded secondary typography.
Structured Secondary Voice
Atherna + Aureline
Grounds bold display lettering with classic typographic authority on posters, badges and apparel.
Inspect Aureline specimenPractical applications
Project & layout
blueprints.
Concrete hierarchy, scale and production guidance tailored to Atherna’s stroke geometry.
Cover mark for an extreme release
The horned mass reads as an emblem at 90 pt, and the crest gives the cover a mark that a plain logotype could not carry.
Hierarchy & layout recipe
Print a 120 mm square sleeve: set the mark at 90 pt across the centre, set the band name in an 8 pt caps serif at the foot, and keep 14 mm of margin so the horned peaks stay inside the square trim.
Pre-production check
Horned peaks printed near the trim look clipped; check the artwork at final size and scale the mark rather than trimming the points.
Print for a tour shirt
The dense horns screen-print as one silhouette at 90 mm, and the mass fills a chest panel where a legible logotype would leave gaps.
Hierarchy & layout recipe
Screen a 300 mm chest print: set the mark at 90 mm, keep the thinnest points at 1.5 mm minimum, and stay 50 mm below the collar so the crest clears the yoke seam.
Pre-production check
A point under 1 mm closes on fleece; check a pull on the actual shirt and blunt the two thinnest horns rather than the whole drawing.
Sticker for a distro table
The sigil reads as a mark at 30 mm on a small sticker, and the crest keeps it recognisable in a rack crowded with square designs.
Hierarchy & layout recipe
Print a 60 mm die-cut sticker: set the mark at 30 mm, keep 4 mm between the horn tips and the cut line, and check that the drips do not run into the die edge.
Pre-production check
A die cut through a drip leaves a sliver that curls; check the cut file and shorten the drips rather than the horns.
Technical & licence verification
File & listing specifications.
File & glyph specifications
- Style classification
- Decorative · Tribal-horned extreme metal face with dripping points and a horned crest
- Foundry / creator
- Burntilldead
- Alternates & swashes
- Stylistic alternates or swashes mentioned
- Language support
- Multilingual character support stated by creator
- File formats mentioned
- OTF, TTF, WOFF
Confirm included OTF/TTF/WOFF formats, full glyph tables and licence coverage on the live store page before batch production.
Closest visual alternatives
Similar fonts
to compare.
Matched across letterform anatomy, stroke behaviour and craft applications.
Spiked black-metal sigil lettering with ragged edges and dripping points
Blackchapel
Blackchapel is an extreme-metal sigil face in which the letters merge into a spiked mass, the stems split into thorns and the bottoms run into drips, so a word reads as a band logo rather than as readable type.
Ideas for this font
Web-strung & thorn-spiked death-metal blackletter
Suklax
Suklax is a jagged death-metal blackletter stretching cobweb-thin tension threads between heavy, thorn-spiked gothic capitals.
Ideas for this font
Twisted thorny death-metal blackletter with hooked spurs and long tails
Mortir
Mortir is a death-metal blackletter in which the gothic skeleton is twisted, the stems sprout thorns and the descenders run long, so a word reads as a brutal logotype with blackletter bones still visible.
Ideas for this font
Jagged symmetrical death-metal thorn display
Nether Black
Nether Black is a ferocious death-metal display typeface erupting with symmetrical thorn spikes and splintered outer wings.
Ideas for this font
Same independent foundry
