Sawone Font by horrorfont — Cutting Specs & Pairings

At-a-glance maker compatibility

Cutting, print & workflow scorecard.

Fine grain and micro-texture excel in 300 DPI print, sublimation, and screen print rather than small vinyl weeding.

Plotter & output verdictPrint, DTF & Sublimation First

Recommended minimum scalePrint any scale · Vinyl 2.2 in+

Character set & structureUppercase, Lowercase & Numerals

OpenType & PUA accessLigatures

Best surfaces & mediaBrand Packaging · Social Graphics · Vinyl Decals

Compatible design toolsIllustrator · Affinity · Canva Pro · Cricut & Silhouette

Visual anatomy & craft review

Letterform structure
of Sawone.

Sawone is a splintered dry-brush horror display: heavy strokes drawn with a split brush so each stem ends in ragged splinters, a slashed counter here and there, and a hard abrasion along the edges that reads as a blade scar. The splinters are the design and they vanish as soon as the face is reversed or printed small. It needs roughly 30 mm for the splinter and the abrasion to read, and it is best in one dark ink on white, or a single blood red on a matte black ground where the splinters print in reverse.

Eerie · Trembling · Unsettling

Two-font hierarchy recipes

Suggested font
pairings.

Tested contrast partners — pairing Sawone with grounded secondary typography.

Neutral Sans WorkhorseSans serif

Original Swaraga preview by pradiptacreative

Sawone + Swaraga

Companion by pradiptacreative · Contrast display sans with single-storey g

Lets Sawone own the focal silhouette while handling secondary copy, sizing and subheads cleanly.

Inspect Swaraga specimen

Structured Secondary VoiceSerif

Original The Simple Editorial preview by IM Studio

Sawone + The Simple Editorial

Companion by IM Studio · High-contrast italic editorial serif

Grounds bold display lettering with classic typographic authority on posters, badges and apparel.

Inspect The Simple Editorial specimen

Practical applications

Project & layout
blueprints.

Concrete hierarchy, scale and production guidance tailored to Sawone’s stroke geometry.

Halloween

Fright-night poster, ticket and door sign

A splintered brush display reads as a scratched bill rather than a cartoon monster, which is what a fright night wants at the gate. The splinters hold at 120 mm on a poster, and one red ink prints the poster and the tickets in one order.

Hierarchy & layout recipe

Poster A2, word 120 mm with 14 mm splinter clearance, details 40 mm, 20 mm margins. Ticket 100 x 50 mm, word 12 mm, 4 mm perforation. Door sign 250 x 350 mm, word 60 mm, 20 mm margins.

Pre-production check

A 100 x 50 mm ticket at 12 mm merges the splinters into a solid edge and the word reads as a barbed bar. Raise the ticket to 18 mm, and print one ticket before the batch.

Editorial & posters

Horror-issue cover, opener and section head

A splintered display turns a horror issue into its own scratched cover. The abrasion holds at 72 pt on a coated cover, and one ink keeps the splinters crisp against a dark ground.

Hierarchy & layout recipe

Cover 210 x 297 mm, title 72 pt with 12 mm splinter clearance, cover lines 10/14 pt over two columns of 82 mm, 18 mm margins and a 10 mm trim. Opener 56 pt with 10 mm clear ground. Section head 26 pt with 8 mm above and 6 mm below.

Pre-production check

At 26 pt on the section head the splinters fill and the head reads as a blot. Keep the face at 44 pt and above, and proof one spread at 1:1.

Brand & packaging

Escape-room identity, card and door decal

A splintered brush face gives an escape room the look of a scratched warning rather than a printed logo. The splinters hold at 26 mm on a card, and one ink prints the card and the decal in one order.

Hierarchy & layout recipe

Card 85 x 55 mm, word 26 mm with 8 mm splinter clearance, details 7/9 pt, 5 mm margins. Door decal 200 x 300 mm, word 60 mm, 20 mm margins. Sign 600 x 400 mm, word 90 mm, 25 mm margins.

Pre-production check

A 200 x 300 mm decal at 60 mm traps air in the splinter gaps and the vinyl lifts at the ragged edges. Use a wet-apply method, and apply one decal before the run.

Technical & licence verification

File & listing specifications.

File & glyph specifications

Style classification: Decorative · Splintered dry-brush slasher horror display
Foundry / creator: horrorfont
Ligatures: Ligatures mentioned in designer listing
Language support: Multilingual character support stated by creator
File formats mentioned: OTF, TTF

Check current files, glyph map & licence details

Confirm included OTF/TTF/WOFF formats, full glyph tables and licence coverage on the live store page before batch production.

Closest visual alternatives