
Hident + Noar
Creates crisp high-hierarchy contrast beneath Hident headlines across menus, websites and labels.
Inspect Noar specimenDisclosure: MakerFileHub may earn a commission from qualifying purchases via paid links on this page. How our links work.
Cut-jointed display serif with a high contrast and joined shapes
Hident is a display serif in which neighbouring letters meet at sliced joints, the stems stay thin and the bowls open wide, so a single word reads as a modern lettering lockup rather than as a set of separate letters.
Paid link
Get this fontProject & layout blueprintsAt-a-glance maker compatibility
Sturdy stroke walls and open counters weed cleanly on adhesive vinyl, HTV apparel film, and cut cardstock.
Visual anatomy & craft review
The h rises on a thin stem with a sliced shoulder, the i carries a light dot, the d closes a wide bowl that meets the following letter, the e turns a level eye and the n keeps two thin shoulders, all at a high contrast with angled joints where letters meet and fine serifs left off. The joints are the character: the letters are drawn to touch, which is why the sample sets one word as a continuous shape across the frame. Because the strokes are thin, the face needs 40 pt upward and a coated stock, and it wants the kerning tightened by hand. The dark blurred ground, the oval badge and the small studio credits are presentation; the cream display word is the face.
Cut joints · Display · Modern
Two-font hierarchy recipes
Tested contrast partners — pairing Hident with grounded secondary typography.

Hident + Noar
Creates crisp high-hierarchy contrast beneath Hident headlines across menus, websites and labels.
Inspect Noar specimen
Hident + Bunglon
Adds a warm human signature touch for 1-to-3-word callouts without competing against structured serif capitals.
Inspect Bunglon specimenPractical applications
Concrete hierarchy, scale and production guidance tailored to Hident’s stroke geometry.
The sliced joints give a studio a mark that reads as one drawn shape, and the thin stems hold a short name at 26 pt on a coated card.
Hierarchy & layout recipe
Print an 85 by 55 mm card: set the studio name at 26 pt with the joints touching, set the address in a 6 pt sans at the foot, and keep 12 mm of white so the lockup is not crowded.
Pre-production check
A joint that does not quite meet reads as a spacing error; check the printed card at full size and adjust the pair, not the whole word.
The joined letters give a cover a constructed look, and the high contrast holds a single word at 100 pt over a dark photograph.
Hierarchy & layout recipe
Print an A4 cover: set the word at 100 pt across the middle third, keep 25 mm of margin, and set the issue line in a 9 pt caps sans 24 mm beneath so the thin stems have air.
Pre-production check
Thin stems printed over a mid-tone photograph disappear; check the proof and keep the word on the darkest band of the image.
The cut joints suit a contemporary invitation, and the wide bowls keep both names readable at 30 pt on a heavy card without a swash.
Hierarchy & layout recipe
Print a 130 by 180 mm card: set both names at 30 pt on one line so the joints meet, set the details in an 8 pt caps serif 20 mm beneath, and keep 20 mm of margin.
Pre-production check
Joined letters set to the trim lose their outer edge; check the imposed card and centre the lockup on its drawn shape.
Technical & licence verification
Confirm included OTF/TTF/WOFF formats, full glyph tables and licence coverage on the live store page before batch production.
Same independent foundry
Allow optional Google Analytics to measure visits and catalogue actions. Your search words and notes are not included. Privacy & storage